Skip to main content

How to control your robot vacuum with Google Assistant

How to control your robot vacuum with Google Assistant


Connect your robot to Google Home and control it with your voice

Share this story

Robot vacuums like this Roomba i3 can respond to voice commands from Google Assistant.
Robot vacuums like this Roomba i3 can respond to voice commands from Google Assistant.
Image: iRobot

Robot vacuums are great for getting the dirty work done for you (admit it, you never cleaned under the couch before you got one, right?). And while these busy little bots can be set on a schedule in their accompanying smartphone apps, or sent on a run with a push of their button, connecting them to Google Home gives you more ways to command them to do your bidding, including just with your voice. 

The majority of robot vacuums with smartphone apps will work with Google Home for voice control through the Google Assistant, although some have more capabilities than others. All of them can be ordered to start and stop, some can be sent home to their dock, and others can be commanded to clean a specific room. 

You can also use your voice assistant to find your robot vacuum if it’s disappeared under some furniture somewhere, and even change modes if your vacuum supports that (for example, go from low suction to max power with just a few words).

Once you connect your robot vacuum to your Google Home app, you’ll be able to operate it using the Google Assistant through any Nest smart speaker (like the Nest Mini) or smart display (like the Nest Hub Max). If you use a smart display, you’ll also see manual controls for the robot, including start / pause, a stop button, and a docked button, so you can control the robot from the display using touch as well as voice commands. These functions are available in the Google Home app, too, and you can talk to the Assistant in the app as another option. 

Once connected to the Google Home app you can control your robot vac with voice commands.
Once connected to the Google Home app you can control your robot vac with voice commands.
Screenshot by Jennifer Pattison Tuohy

Connect your robot vacuum to Google Assistant

Connecting your robot vacuum to Google Assistant is done in the Google Home app on your phone or tablet. You will need to have the robot manufacturer’s app installed on your phone first, and have already set up an account. Then follow these steps:

  • Open the Google Home app
  • Tap the plus symbol at the top of the screen
  • Tap Set Up Device
  • Tap Works with Google
  • In the search field, search for your robot manufacturer’s name ( i.e. iRobot, Roborock, Ecovac, Eufy)
  • Enter your robot vac’s account details to authorize account linking
  • A screen showing compatible robot vacuums will appear. Select your robot vacuum.
  • Choose your Home from the next screen and tap Next to add the robot (if you only have one home set up in the app you won’t see this screen)
  • Select a Room in your Home to put the robot vac, tap Next (Rooms help organize your devices to make it easier to find them in the app)
  • You’ll be sent back to the Home page. Scroll down to locate your robot vacuum’s icon.
  • Tap the icon, then tap the settings icon to change the robot’s name if you want to (this can make it easier to give voice commands) 
  • Now you can see the vacuum on the main Google Home app screen and can control it from there, or with your voice through a smart speaker, or directly on a smart display.
The Roborock S7 Plus works with Google Assistant voice commands.
The Roborock S7 Plus works with Google Assistant voice commands.
Photo by Jennifer Pattison Tuohy / The Verge

Google Assistant voice commands you can use with your robot vacuum

With Google voice control, the commands are very straightforward, especially if you only have one robot vac in your house. Just say: “Hey Google, start cleaning.” You don’t even need to say your robot’s name.

Here’s some examples of phrases you can use to control your robot vac: 

  • Hey Google, start vacuuming/cleaning
  • Hey Google, stop vacuuming/cleaning
  • Hey Google, pause vacuuming/cleaning 
  • Hey Google, resume vacuuming/cleaning
  • Hey Google, clean the kitchen (only works on vacuums with smart mapping features)
  • Hey Google, where is my vacuum? (may require a mapping robot)
  • Hey Google, is my vacuum charging?
  • Hey Google, is my vacuum docked?
  • Hey Google, tell my vacuum to go home

If you have more than one vacuum you’ll need to use names so that Google knows which robot you want to use. If you just say “Hey Google, start cleaning,” it will send them all out.

  • Hey Google, tell [name of vacuum] to vacuum
  • Hey Google, tell [name of vacuum] to stop vacuuming 
  • Hey Google, tell [name of vacuum] to vacuum the kitchen (requires a mapping robot)
  • Hey Google, tell [name of vacuum] to go home 

If Google is not sure which vacuum you want it will ask you. 

Pro tip: If you use a person's name for your robot the voice assistant may get confused and think you want to call or message someone when you issue a command. If this happens, change it in the Google Home app to something easier to understand. I find Robot Overlord works well.

Today’s Storystream

Feed refreshed Sep 24 Striking out

External Link
Emma RothSep 24
California Governor Gavin Newsom vetoes the state’s “BitLicense” law.

The bill, called the Digital Financial Assets Law, would establish a regulatory framework for companies that transact with cryptocurrency in the state, similar to New York’s BitLicense system. In a statement, Newsom says it’s “premature to lock a licensing structure” and that implementing such a program is a “costly undertaking:”

A more flexible approach is needed to ensure regulatory oversight can keep up with rapidly evolving technology and use cases, and is tailored with the proper tools to address trends and mitigate consumer harm.

Andrew WebsterSep 24
Look at this Thing.

At its Tudum event today, Netflix showed off a new clip from the Tim Burton series Wednesday, which focused on a very important character: the sentient hand known as Thing. The full series starts streaming on November 23rd.

The Verge
Andrew WebsterSep 24
Get ready for some Netflix news.

At 1PM ET today Netflix is streaming its second annual Tudum event, where you can expect to hear news about and see trailers from its biggest franchises, including The Witcher and Bridgerton. I’ll be covering the event live alongside my colleague Charles Pulliam-Moore, and you can also watch along at the link below. There will be lots of expected names during the stream, but I have my fingers crossed for a new season of Hemlock Grove.

Andrew WebsterSep 24
Looking for something to do this weekend?

Why not hang out on the couch playing video games and watching TV. It’s a good time for it, with intriguing recent releases like Return to Monkey Island, Session: Skate Sim, and the Star Wars spinoff Andor. Or you could check out some of the new anime on Netflix, including Thermae Romae Novae (pictured below), which is my personal favorite time-traveling story about bathing.

A screenshot from the Netflix anime Thermae Romae Novae.
Thermae Romae Novae.
Image: Netflix
Jay PetersSep 23
Twitch’s creators SVP is leaving the company.

Constance Knight, Twitch’s senior vice president of global creators, is leaving for a new opportunity, according to Bloomberg’s Cecilia D’Anastasio. Knight shared her departure with staff on the same day Twitch announced impending cuts to how much its biggest streamers will earn from subscriptions.

Tom WarrenSep 23
Has the Windows 11 2022 Update made your gaming PC stutter?

Nvidia GPU owners have been complaining of stuttering and poor frame rates with the latest Windows 11 update, but thankfully there’s a fix. Nvidia has identified an issue with its GeForce Experience overlay and the Windows 11 2022 Update (22H2). A fix is available in beta from Nvidia’s website.

External Link
If you’re using crash detection on the iPhone 14, invest in a really good phone mount.

Motorcycle owner Douglas Sonders has a cautionary tale in Jalopnik today about the iPhone 14’s new crash detection feature. He was riding his LiveWire One motorcycle down the West Side Highway at about 60 mph when he hit a bump, causing his iPhone 14 Pro Max to fly off its handlebar mount. Soon after, his girlfriend and parents received text messages that he had been in a horrible accident, causing several hours of panic. The phone even called the police, all because it fell off the handlebars. All thanks to crash detection.

Riding a motorcycle is very dangerous, and the last thing anyone needs is to think their loved one was in a horrible crash when they weren’t. This is obviously an edge case, but it makes me wonder what other sort of false positives we see as more phones adopt this technology.

External Link
Ford is running out of its own Blue Oval badges.

Running out of semiconductors is one thing, but running out of your own iconic nameplates is just downright brutal. The Wall Street Journal reports badge and nameplate shortages are impacting the automaker's popular F-series pickup lineup, delaying deliveries and causing general chaos.

Some executives are even proposing a 3D printing workaround, but they didn’t feel like the substitutes would clear the bar. All in all, it's been a dreadful summer of supply chain setbacks for Ford, leading the company to reorganize its org chart to bring some sort of relief.