This advertising content was produced in collaboration between Vox Creative and our sponsor, without involvement from Vox Media editorial staff.
What’s your morning routine? Maybe you fly out the door with no time to spare, or maybe you’re an early bird who luxuriates in the quiet morning hours. Whatever your preference, any morning can be enhanced with this impressive DIY project that integrates a smart productivity screen — which can show you the weather, today’s headlines, and more — right into your mirror. This project was inspired by the 8-inch LCD productivity screen in the new Ford F-150 that tells you everything you need to know about your truck, from its fuel status to its tire pressure.
Ready to make your own smart mirror? Watch the video above and follow these simple steps.
Here’s what you’ll need:
- Circular saw
- Paintbrush and paint
- Mirror film
- X-Acto knife
- Hanging hardware
- Raspberry Pi
- LCD TV
Step 1: Install the Magic Mirror software onto your Raspberry Pi
This is the most technical element of this DIY project, but don’t fear! Even if you’ve never coded before, Raspberry Pi is a great place to start. Familiarize yourself with the platform first, then follow this step-by-step guide.
Step 2: Build a box for the TV
Measure your TV. Using those dimensions, build a box that will fit the TV snugly.
Step 3: Make a frame to go around the outside
Make a picture frame to put around the outside of the TV screen. This helps your smart mirror look more like a regular mirror — and it will up the surprise factor when people realize it’s way cooler than just that.
Step 4: Paint or stain the frame
You’ll want your smart mirror to match your decor, so paint or stain the frame accordingly.
Step 5: Apply the mirror film
To create the mirror, apply the mirror film to a regular piece of plexiglass. Make sure the surface of the plexiglass is completely clean before you apply the film; otherwise, dust specks will appear under the film. Peel off the backing of the film and spray down the plexiglass with water. Lay down the film and then use a squeegee to get rid of air bubbles. Let dry.
Step 6: Cut off the edges of the film
Use an X-Acto knife to trim off the excess film.
Step 7: Attach the frame
Set the mirrored plexiglass in place on top of the TV, and put the frame on top of the box. Nail the frame onto the box to secure it into place.
Step 8: Hang the mirror on the wall
Hang the mirror on the wall, plug it in, and power it up.
In just a few simple steps, you now have your own custom smart mirror! Stay tuned for more DIY episodes inspired by the Ford F-150.